What does the axle load tester measure?
It measures the left and right wheel weights and calculates vehicle weight. The specified measurement resolution is 1 kg.
Inspection at the end of the assembly process
Automotive testing line
Bring vehicle inspection stations into the final-assembly flow. Explore the alignment, lighting, speed, axle-load and braking equipment described in DUOYUAN's testing-line offering.
DUOYUAN / Engineering & integrationAutomotive production systems
Which inspections need to fit into your end-of-line process?
Organize the checks around the finished vehicle.
Explore the connected disciplines within this solution, then use the project below to see a specific application.
01
Alignment & side slip
Four-wheel alignment and side-slip testing examine wheel positioning at dedicated stations.
02
Lighting
Headlight detection examines luminous intensity and the optical-axis offset of high and low beams.
03
Speed & axle load
Speed-test platforms, free rollers and axle-load testers support the corresponding vehicle checks.
04
Braking
ABS brake testing examines braking force and related measurements in the specified equipment configuration.
From capability to application
Inside a relevant project.
Project experience Automotive testing line
Final testing within a complete vehicle assembly project.
The Henan project includes sealing tests, vehicle calibration, appearance inspection and off-line quality control. It illustrates final-testing integration; individual station specifications depend on the project.
- Sealing tests and vehicle calibration
- Appearance inspection
- Off-line quality control
Go deeper
Station & equipment details.
The equipment descriptions below include specific configurations and project responsibilities. Confirm the applicable requirements and specifications for your project.
Bumpy road
A set of 6-meter bumpy road before four-wh eel alignment shall be designed, supplied and installed by Party B (the foundation and embedded parts shall be implemented by Party A) and arranged in front of the four-wheel station.
Four wheel locator
Headlight detector
The headlamp detector uses an optical reflection structure, and displays the light distribution characteristics of the inspected headlamp on the instrument projection screen to detect the luminous intensity and optical axis offset of the headlamp. Therefore, it can not only detect the luminous intensity and optical axis offset of the high-beam lamp, but also detect the luminous intensity and optical axis offset of the near-light lamp.
Side slip tester
The equipment mainly reflects the advantages and disadvantages of the positioning of the front wheel of the vehicle. Characterized by side slip and fully meet the requirements of GB7258-2017 standard.
Speed detection table
The vehicle speed tester is measured by driving vehicle. Using steel plate bending integral welding body, good strength, beautiful appearance.
The speed tester is provided with a mechanism to prevent the tire from being scratched during the speed detection.
Photoelectric switch, innovative design on the cover plate at both ends of the speed, free from the photoelectric switch to buried pipe construction, also removed from the site installation, not afraid of car pressure, not afraid of scratch damage, but also to ensure that including the rim with perforation of the vehicle detection, the vehicle in place information is accurate.
Free roller
The whole machine is integral structure, easy to install and debug
Adopt air bag hold brake brake
It requires reliable braking and minimum bearing load on the back of the roller bearing.
The roller is controlled by the chain linkage of the sprocket, which enhances the braking reliability.
Axle load tester
Detect wheel weight and calculate vehicle weight.
Sensor in left and right parts, can measure wheel weight, with left and right wheel measurement function, resolution of 1kg.
ABS brake tester
It is mainly used to detect the braking force and blocking force of the left and right wheels of the car, the braking force difference and the maximum process difference of the left and right wheels, ABS detection, the percentage of the shaft braking force in the shaft load, and the braking system coordination time (requiring pedal switch). It is suitable for all types of vehicles with axle load weight not more than 15 000 kg.
Define the next step
Bring your production requirements into focus.
Start with the information you have. These details help frame a useful engineering conversation.
Prepare your project briefVehicle types, axle loads, dimensions and the inspection procedures required for the project.
Available floor plan, line rhythm and the foundations and utilities each station will require.
Applicable requirements to confirm, measurement records and interfaces with the production system.
FAQ
What is the axle load limit of this ABS brake tester?
The ABS brake tester is suitable for vehicles with an axle load of no more than 15,000 kg.